Supreme Heat:  waste oil furnaces              Val6:  portable diesel-fired radiant heaters

QuietCool:  portable evaporative coolers      Alternate Heating Systems:  waste oil and wood boilers

Hago:  nozzles                                                Crown:  electrodes 

Carlin:  controllers, transformers                   Suntec:  pumps

Norgren:  oil and air regulators                      R.W. Beckett:  burners, motors, blower wheels

Metal Fab:  class A chimney                          Webster:  transformers

Lenz:  gauges, filter assemblies                     Combu:  filter assemblies, solenoids, check valves, ball valves

Delavan:  nozzles, flame cones                      White Rogers:  controllers, thermostats, fan limit switches

Honeywell:  controllers, cad cells, fan limit switches, thermostats

SUPREME HEAT WASTE OIL FURNACES

SUPREME FURNACE FEATURES & BENEFITS

PORTABLE

VAL6 Infrared Heaters

Model	KBE5S	KBE5L	EPX	DAYSTAR	HOTGUN
Heat Output	111,000 BTU/hr	111,000 BTU/hr	100,000 BTU/hr on low; 140,000 BTU/hr on high	51,800 BTU/hr	116,000 BTU/hr
Fuel Consumption	0.85 gal/hr	0.85 gal/hr	0.75 gal/hr on low; 1.02 gal/hr on high	0.4 gal/hr	0.9 gal/hr
Fuel	Diesel, Kerosene	Diesel, Kerosene	Diesel, Kerosene	Diesel, Kerosene	Diesel, Kerosene
Tank Capacity	9 gallons	15.1 gallons	15.4 gallons	2.6 gallons	14.3 gallons
Power Source	120V 60Hz, single phase	120V 60Hz, single phase	120V 60Hz, single phase	120V 60Hz, single phase	120V 60Hz, single phase
Power Consumption	100W	100W	96W on low; 97W on high; 123W on ignition	120W	176W
Safety Device	Photocell flame monitor, 3A fuse; Tip-over switch	Photocell flame monitor, 3A fuse; Tip-over switch	Photocell flame monitor, 3A fuse; Overheat protection; Tip-over switch	Photocell flame monitor, 3A fuse; Overheat prevention system; Tip-over switch	Photocell flame monitor, 3A fuse; Overheat prevention system; Tip-over switch
Burner Type	High pressure spray gun	High pressure spray gun	High pressure spray gun	High pressure spray gun	High pressure spray gun
Control System	5 sec. Prepurge, 180 sec. Postpurge	5 sec. Prepurge, 180 sec. Postpurge	5 sec. Prepurge, 180 sec. Postpurge	5 sec. Prepurge, 180 sec. Postpurge	5 sec. Prepurge, 180 sec. Postpurge
External Dimensions (H x W x L)	36.4 x 27.9 x 27.4 (in.)	37.5 x 28.0 x 29.2 (in.)	38.2 x 25.4 x 48.6 (in.)	23.4 x 12.2 x 22.8 (in.)	30.8 x 22.3 x 28.1 (in.)
Features			Built-in thermostat, High/low switch
Dry Weight	83.8 lbs	92.6 lbs	110 lbs	40 lbs	82 lbs

GREAT ADVANTAGES WITH VAL6:

Sunlight Warmth

VAL6’s radiant heat penetrates

  evenly on and into surfaces just

 like sunlight and can be connected

to a room thermostat.

Best Choice for Outdoors

VAL6’s performance is unique in the

 outdoors and unlike forced air

heaters, which loose heat from wind

 and cold air and can be run on a 12

volt adapter

No Air Movement Dust Free

VAl6 generates straightforward

infrared heat which is unaffected

by air flow, thus creating a

comfortable and dust-free

environment and it's low noise.

Odorless

VAL6’s perfect combustion system

produces no odor and no smoke

while running. The exhaust gas

goes upward.  99% Efficient 

 

 

Quiet Cool Evaporative

Coolers

For Many Industrial Applications

	QC36D1 36" Direct drive, Single speed, 1/2 HP. Rated @ 9700 cfm. QuietCool's most economical model.
	QC36B1 36" Belt drive, Single speed, 1/2 HP. QC36B3 36" Belt drive, Three speed, 1/2 HP. QC36B1X 36" Belt drive, Single speed, 3/4 HP. - 1/2 HP models rated @ 9700 cfm. - 3/4 HP model rated @ 10,900 cfm. QuietCool belt drive models are the Standard for quiet.
	QC36B1XHL 36" Belt drive, Single speed, 3/4 HP, Hazardous locations. Rated @ 10,900 cfm. Class I, Group D. Class II, Groups F & G.

Benefits and Features

1. Maintenance Free - Designed and manufactured to he virtually maintenance free.
2. Easy to operate - Needs only water and electricity to operate.
3. No waste - Highly efficient system, no water is wasted.
4. Easy to move - Completely portable, so anyone can roll it quickly to any hot area.
5. Amazingly Cooler air - Discharged air is up to 20°F degrees cooler than the incoming air.
6. Filtered Air - Filters the air as is passes through the cooling media eliminating many air born particles.
7. Plus - Portable 60 gallon water reservoir is available where no water supply is readily accessible.

Note: The QuietCool Portable Evaporative Cooler has ETL Approval #9800103 which conforms to UL standard 507.

Construction

1. Housing - Constructed of rotomolded, corrosion free polyethelyne.
2. Fan - Industrial duty galvanized steel construction.
3. Fan Motor - High efficiency for a long life.
4. Recirculating Pump - High efficiency, maintenance free. and corrosion resistant submersible pump.
5. Float Valve - Corrosion and maintenance free plastic.
6. Water Lines/Fittings - All corrosion free materials.
7. Cooling Media - Cross corrugated angle fluted specially formulated cellulose material treated with a thermosetting resin. Specially designed for evaporative cooling so there is no excess load on the fan.

 

WASTE OIL BOILERS

  Turn a Liability into an Asset

B Series Waste Oil Heater/Boiler

The B Series waste oil heater/boiler design is tried and true.  The design has been in operation for over 18 years with a spotless record.  Even after 18 years, our B Series design is still the most state-of-the-art waste oil heater/boiler design on the market.

The following is what makes the B Series design different from our competitors:

• An Airflow-inducing Fan causes the ash to be pulled through the boiler at high speeds keeping it from depositing on the burner wall.  It also allows adjustment of the airflow according to the desired BTU.
• The Swirl Chamber is a high pressure area in the burner that allows hot exhaust to reside for a long period of time.  Coupled with a swirling motion, which gives the burner the ability to drop the temperature of the exhaust from 1,800 degrees to as low as 350 degrees (see below) before it is allowed to exit the burner, THE SWIRL CHAMBER IS OUR KEY TO HIGH EFFICIENCY COMBUSTION OF WASTE OIL .
• The Cyclone Ash Collection System does the major part of the self-cleaning action of our waste oil burner - the rapidly moving ash acts to scour the walls of the inside of the burner preventing buildup and providing a self-cleaning action.  The cyclone funnels the ash into a pail for easy disposal.
• A Secondary Air Inlet allows oxygen to enter the burn target for secondary combustion - any un-combusted waste oil remaining in the flue gases is provided another opportunity to be completely combusted.

Stack Temperature

The stack temperature is an indicator of how completely the waste oil is being combusted.  The Alternate Heating Systems Inc. B Series operates with one of the coolest stack temperatures of any waste oil heater/boiler on the market (we believe that it is actually the coolest).  Because of the nature of the fuel, the stack temperature will vary.  The low stack temperatures of our boilers are almost unheard of on the market.

Using Fly Ash to Self-Clean the Swirl Chamber

The combustion of the fuel is so thorough that very little fly ash is produced.  But even the fly ash that is produced is put to good use - the system is designed so that the fly ash scours the inside of the swirl chamber, preventing the buildup of creosote that can dramatically lower combustion efficiency.  After scouring the swirl chamber, the little fly ash that remains from the combustion process is deposited in an ash pan that can be easily removed.

*Specifications and design subject to change without notice.
All specifications are approximate.

The Alternate Heating Systems Water Wall

Each Alternate Heating Systems boiler, heater and furnace is designed so that every piece of steel is in contact with the water in the system that is used to transfer heat to your radiant floor heat system, radiator, baseboard hot water, or heat exchanger.  This design ensures the most rapid and efficient heat transfer from the firebox into the water.  Efficiency is increased compared to other boilers that do not have this feature by allowing less heat to escape from the boiler surfaces before it is captured in the water.

ASME Certification

The American Society of Mechanical Engineers certification is available on any of our boiler lines for an additional charge.  This certification assures that the pressure vessel has been designed and constructed in accordance with the ASME Code.  This certification is required for all commercial installations.  The certification is also required for some residential installations depending upon local codes - it is up to the homeowner to determine the need for an ASME certification on any boiler purchased.

10 Year Limited Warranty